Ultrasonic sensors provide protection for fibre-glass canopies and enhanced content protection, as sensors detect intrusion by bouncing sound waves off the interior of the vehicles ACTIVE ULTRASONIC PROTECTION FIELD Sensor uses a 40KHz sound wave to measure echoes from the inside of the vehicle. Any change in the echo is determined to be an intruder TEMPERATURE COMPENSATIVE CIRCUITRY Ensures sensitivity does not change as ambient temperature rises or falls SENSITIVITY ADJUSTMENT Sensor allows installer to adjust sensitivity to provide compatibility with different size vehicles specification: VERY LOW CURRENT DRAW 11.5mA when idle, 26.7mA when triggered for 2 seconds WIDE OPERATING VOLTAGE Operating voltage +9VDC to +15VDC OPERATING TEMPERATURE -20 degrees to +85 degrees for equipment designed to be installed within vehicle cabin POLARITY PROTECTION The system circuitry is design to protect itself against accidental battery polarity reversal. This can happen when replacing the vehicle battery TRIGGER OUTPUT RATING Each output of the sensor can sink 300mA, suitable for energising relay coil when necessary TRIGGER OUTPUT IS BACK EMF PROTECTED Clamping diode protects the output driver transistor(s) to stop damage from the super high voltages that occur when a relay coil is released POWER CONSUMPTION Each additional sensor added to a system will increase it's over-all power consumption from the car battery.
Location: 1/288 Victoria Road, Malaga Western Australia 6090, Australia
N/A
When you call, Don't forget to mention ADSCT whenever you will call to user. Be safe during payment.
162000 AUTOWATCH ULTRASONIC SENSOR
Message Sent
Australia 
USA 
Canada 
