Fluke 771 Clampmeter, 100mA dc

Fluke 771 mA Process Clamp Meter Need more hours in your day? Save time by not breaking the loop on 4-20 mA signal measurements with the Fluke 771 Process Clamp Meter. Are you spending time: •Taking mA measurements by removing a wire and breaking the loop •********* loop •Testing analog input/output on a console •Troubleshooting devices with mA inputs and outputs •Repai********* oops •Going back to the shop to get extra tools If you need more time in your busy day take a good look at the Fluke 771 mA Clamp Meters. It’s designed to save you time, and money, by eliminating time wasting activities. Now you can troubleshoot and repair 4-20 mA loops without breaking the loop or bringing down the system. Here are some specific ways the Fluke 771 clamp meters will help you: Measure mA signals for PLC and control system analog I/O without breaking the loop • Measures low level dc current • Correlate process indication with real physical value Measure output signals from transmitters without breaking the loop • Maintain and troubleshoot process and automation equipment without breaking the loop • No disruption to the process Detachable clamp with extension cable • Measurements in tight locations • Enables measurements in difficult situations Measurement Spotlight • Illuminates hard to see wires in dark enclosures • Measurement process is easier and quicker Measure up to 99.9 mA range non-contact • Wide range of measurements • Measures 10 to 50 mA signals in older control systems Automatic power off • After 15 minutes and 2 minute automatic off for backlight and spotlight • Saves battery life Features • Best in class 0.2% accuracy • 0.01 mA resolution and sensitivity • Measure 4 to 20 mA signals without “breaking the loop” • Measure mA signals for PLC and control system analog I/O • Dual backlit display with both mA measurement and percent of 4 to 20 mA span • Measurement Spotlight illuminates hard to see wires in dark enclosures • Detachable clamp with extension cable for measurements in tight locations • Measure 10 to 50 mA signals in older control systems using the 99.9 mA range • Automatically change the 4 to 20 mA output for remote testing • Power saving features, auto-off, backlight timeout extend battery life • Hold function captures and displays changing measurements Function Range Resolution Accuracy Measure 4-20mA -20.99 to +20.99 mA 0.01mA 0.2% or reading + 5counts Measure 10-50mA -21 to -99.9 mA; +21 to +99.9 mA 0.1mA 1% or reading +5 counts Dimensions & weight 59 x 38 x 212 mm; 260g Supplied with 2 AA batteries, soft carry case and user manual.

Fluke 771 Clampmeter, 100mA dc

Location: Sydney 25 Pavesi Street Smithfield NSW 2164

N/A

When you call, Don't forget to mention ADSCT whenever you will call to user. Be safe during payment.