SKF Bearing Heater TMBH 1

Portable Bea********* ing heater is portable, lightweight, and used for heating bearings with an inner diameter from 20 mm to 100 mm with a maximum weight of 4.5 kg. The bearing heater is also equipped with temperature and time control. The SKF TMBH heater uses a patented method of heating based on high frequency induction, which provides optimised efficiency. This method is quiet and creates no magnetisation at all. In addition to bearings, the heater can also be used for heating ferrous components such as gears, pulleys, bushings and shrink rings. Features and Benefits • Lightweight and portable • Heating efficiency >85% • Components are never magnetised • Noiseless operation • Timer control 0 min to 60 min • Temperature control 0 - 200 • Complete with carry case • 350 W Product Application Information Both greased and sealed bearings can be heated without risk of damage. Note No fitted electrical cable plug is supplied with this bearing heater. An approved electrical plug should be attached by a suitably-qualified individual to suit local requirements, such as: (UK) BS1363 rubber plug 488-387 ; (FR) rubber plug 700-1094 ; (DE) Schuko rubber plug 705-0822 ; or (US and JP) nylon plug 316-0133 Supplied with heating clamp, temperature probe, power cable (without plug) heat resistant gloves and a carry case SKF Electric Induction Heaters and Hot Plates enable bearings and other machinery components to be heated prior to installation. The induction heaters and hot plates are suitable for use with a variety of component sizes (actual sizes accepted depend on which induction heater or hot plate is used) and individual components may be heated to 200/250°C. SKF induction heaters and hot plates are thermostati********* ns, overheat protection is also incorporated into the units to ensure that the induction heater or hot plate is switched off in the event of thermostat failure.

SKF Bearing Heater TMBH 1

Location: Sydney 25 Pavesi Street Smithfield NSW 2164

N/A

When you call, Don't forget to mention ADSCT whenever you will call to user. Be safe during payment.