PROJECTA VSR100 100A 12V VOLTAGE SENSITIVE Part No. VSR100 Brand PROJECTA Description 100A 12V VOLTAGE SENSITIVE Unit Each Notes Voltage 12V Charging current 100A Continuous 200A Peak Cut-in voltage 13.4V Cut-out voltage 12.8V Cut-out delay 8 seconds Min operating voltage 10V Charge type Parallel Control MCU Mounting Surface/firewall Current draw Charging 550mA (standby 10mA) Surge protection Built-in Ingress protection IP66 Override Requires minimum 10V Recommended fuse 150A Minimum cable size 14mm2 (6 B&S) Approvals EMC L.E.D charge indication Red light Power on Suitable for a wide variety of 12V DC applications, the new Projecta VSR Units & VSR Kit sense the input voltage and automati********* e or circuit at pre-set voltages. Fully sealed to IP66 and surge protected, the VSR units feature a manual override function allowing the user to engage the solenoid from as low as 10V. VSR units are ideal for dual battery setups as they enable the batteries to be paralleled for high power usage, eg jumpstarting or winching.

PROJECTA VSR100 100A 12V VOLTAGE SENSIT

Location: Rocklea, Brisbane South West, Brisbane Region, Queensland

Contact No. ******4888 View

PROJECTA VSR100 100A 12V VOLTAGE SENSITIVE

Part No. VSR100
Brand PROJECTA
Description 100A 12V VOLTAGE SENSITIVE
Unit Each
Notes Voltage 12V
Charging current 100A Continuous 200A Peak
Cut-in voltage 13.4V
Cut-out voltage 12.8V
Cut-out delay 8 seconds
Min operating voltage 10V
Charge type Parallel
Control MCU
Mounting Surface/firewall
Current draw Charging 550mA (standby 10mA)
Surge protection Built-in
Ingress protection IP66
Override Requires minimum 10V
Recommended fuse 150A
Minimum cable size 14mm2 (6 B&S)
Approvals EMC
L.E.D charge indication
Red light Power on

Suitable for a wide variety of 12V DC applications, the new Projecta VSR Units & VSR Kit sense the input voltage and automatically connect/ disconnect the appliance or circuit at pre-set voltages.
Fully sealed to IP66 and surge protected, the VSR units feature a manual override function allowing the user to engage the solenoid from as low as 10V. VSR units are ideal for dual battery setups as they enable the batteries to be paralleled for high power usage, eg jumpstarting or winching.

When you call, Don't forget to mention ADSCT whenever you will call to user. Be safe during payment.