Elcon International - DMC - Both sides g

The fast and safe way of testing your HV Circuit breakers With the new tool for the Elcon products Switch Analyzers SA10 and SA5, the DCM (Dynamic Contact Measurment), will it be possible to do all the tests and analyzes you are used too, but faster and even both side grounded. The SA10 itself can only measure dynamic contact on one contact a time, but with the new DCM tool it is possible to measure at the same time up to 2 contacts in series for each phase , total 6 contacts at the same time. Or a single phase operated CB with up to six contacts in series.You can perform tests with both sides of the circuit breaker grounded and you don’t need to rewire between the single tests. This is a great safety advantages for the maintenance personal, since they do not need to go up and done so many times to do rewi********* ften be exposed to danger, like live bus bars or induction. One close and open operation will give you all the information you need to do the analyze in the BTS11 software, such as; Operation time Coil current Coil voltage Travel Speed Damping Static and Dynamic resistance And much more... Connection example The DCM Kit consists of one DCM-CU-unit and, three DCM-2-units, and all necessary cables and connector’s in a transport case. DCM-CU-unit is connected to the SA10 or SA5 wireless or with a communication cable. DCM-2-units are hooked up at each phase close to the contact chambers, and the measuring cables from the DCM-2-units are connected to the CB. Example of operations done with the DCM tool Close Open C-O Min function coil voltage Spring charge(motor curent) Slip coupling Damping curve Static resistance Dynamic resistance Other testing possibilities and features Define the trig conditions. Contact, coil, travel or analogue trig Choose sampling rate. Up to 50 kHz Up to three analogue and/or digital transducers used simultaneously Complete curve customizability. Colour, visibility, filled or regular, scale etc Easy functions/guides for calibration Speed and acceleration curves Define any number of Speed, Distance or Time measurements Test reports Create your own test report templates using the dynamics that MS word provides. Multi lingual Extensive protocol functions to meet any customers demands Digital signing options Automatic compressing and preparing protocols for email or web-publishing Built in pdf support

Elcon International - DMC - Both sides g

Location: 7 Anella Ave 7 Anella Ave, Castle Hill NSW 2154, Australia

N/A

When you call, Don't forget to mention ADSCT whenever you will call to user. Be safe during payment.