30 AMP ENERDRIVE DC to DC Battery Charger Model EN3DC30 Output Rating Output Voltage 12V Nominal (8.0V min) Output Current (Maximum) 30A Output Power 465W Charger DC Output (CH1): Selectable Battery Type Gel, AGM, Flooded, Lithium, Program Charger Voltage Range 13.8V – 15.5V Float Voltage Range 13.0V – 13.8V Charger Current (User Selectable) 30/20/10/5A Equalize Voltage (Flooded Battery) 15.5V Equalize Charging Current 10% of Bulk Current Setting Charging Control Three Stages DC Output Bank Single Current draw from CH1 when in use < 70 mA with remote < 50 mA without remote Battery Temperature Setting Low/ Normal/ High (Battery Temperature Sensor Standard) Efficiency 95% INPUT Rating (CH2 – MPPT Solar) Input Voltage 14.5 – 45VOC PV Charging Mechanism MPPT type (approx. 97% efficiency) Maximum Input 500W *see note on page 20 of owners manual INPUT Rating (CH3 – Start/Alternator) Input Voltage 10.5 – 16VDC / 21 – 32VDC Note: Specifications subject to change without notice. Dimensions Height x Width x Depth 242mm x 172mm x 74mm Unit Weight 1.85 Kg Shipping Weight 2.17 kg
Location: 7 /8 Centre View Drive Biggera Waters, QLD 4216, Australia
Contact No. ******6071 View
N/A
When you call, Don't forget to mention ADSCT whenever you will call to user. Be safe during payment.
30AMP ENERDRIVE DC to DC Battery Charger
Message Sent
Australia 
USA 
Canada 
