Raspberry Pi 3 compute module I/O

Raspberry Pi Compute Module 3 IO Board The Compute Module 3 IO Board (CMIO V3) is suitable for the development of Compute Module 3 or Compute Module 3 Lite. Also the IO Board has an SD card socket to support the Compute Module Lite 3 variant. To start the development, plug the Compute Module 3 or Compute Module 3 Lite into the IO Board. The IO board provides the necessary power, to set up Raspbian and program the module. Compute Modules 3 are available at RS: RS 1232011 - Compute Module 3 – with eMMC Flash and the SD/eMMC RS 1232012 - Compute Module 3 Lite – not fitted with eMMC Flash and the SD/eMMC interface. But pins are available for the designer to connect their own SD/eMMC device. Note Raspberry Pi guarantee the availability of CM3 and CM3 Lite until at least January 2023. Contents IO Board only.

Raspberry Pi 3 compute module I/O

Location: Sydney 25 Pavesi Street Smithfield NSW 2164

N/A

When you call, Don't forget to mention ADSCT whenever you will call to user. Be safe during payment.