Other Tools & DIY in Brisbane Region, Queensland (157)

CAREFREE - Hardware Kit, Long Suitable f (Other Tools & DIY)

CAREFREE - Hardware Kit, Long Suitable f - Best suited for larger caravans with a straight outer wall i.e. walls with a height of 1.7mt – 2.1mt from the floor line up to the awning railing.

CAREFREE - Bottom Bracket Black or White (Other Tools & DIY)

CAREFREE - Bottom Bracket Black or White - This bracket is fitted to the van wall, it clips to the Car Port Foot to support the leg. It can be used on either the left or right side. Suits Carefree Fiesta / Spirit FX / Simplicity Awnings Carefree Part Number: 901019 Base Plate Measures 90 x 90mm Available in Black or White subject to stock.

AWNING Door Roller (Small) White (Other Tools & DIY)

AWNING Door Roller (Small) White - The Annex Door Roller will protect your awning from damage caused by the door of your motorhome or RV. Your door will not tear your awning when you have this Annex Door Roller. Available in white to complement the aesthetics of your RV, this device attachs to the top corner of the door. With only one screw to anchor in place, installation ...

ATRV - Travel Lock Slide Black or White (Other Tools & DIY)

ATRV - Travel Lock Slide Black or White - Aussie Traveller Sunburst Awning Replacement Travel Lock Slider

ATRV - Roller Drive Assembley (Right Han (Other Tools & DIY)

ATRV - Roller Drive Assembley (Right Han - Replacement right hand roller drive assembly

ATRV - Ratchet Dog (Other Tools & DIY)

ATRV - Ratchet Dog - Replacement ratchet dog with plastic collar to suit Sunburst awning.

Anode Shaft 1 1/2" (38) CDZ4-150 (Other Tools & DIY)

Anode Shaft 1 1/2" (38) CDZ4-150 - Description: Anode Shaft 1 1/2" To suit Imperial propeller shafts. Anode I.D: 38.10mm Anode O.D: 70mm Anode Length: 64mm Gross Wt: 0.80kg To suit Shaft Size: 1 1/2"

Anode Zinc Rudder Pair CDZ6-130 (Other Tools & DIY)

Anode Zinc Rudder Pair CDZ6-130 - Description: Anode Zinc Rudder Pair To suit rudders, keels, and transoms. Anode Diameter: 125mm Anode Depth: 22mm Hole Recess Diameter: 22mm Hole Recess Depth:10mm Thru Hole Diameter: 8.00mm Gross Wt (Kg): 2.15

Anode Shaft 40mm CDZ4-40M (Other Tools & DIY)

Anode Shaft 40mm CDZ4-40M - Description: Anode Shaft 40mm To suit Metric propeller shafts. Pressure diecast for a superb finish. Anode I.D: 40mm Anode O.D: 84mm Anode Length: 68mm Gross Wt: 1.20kg To metric Shaft Size: 40

Anode Zinc Pencil Rods 1" x 12" CDZ5-1.0 (Other Tools & DIY)

Anode Zinc Pencil Rods 1" x 12" CDZ5-1.0 - Description: Anode Zinc Pencil rod 1" x 12" To suit water jackets, pumps, heat exchangers, stock material for marine engine anodes Anode Diameter: 25mm Anode Length: 300mm Gross Wt: 1.05Kg

Anode Zinc Ingot 4 x 1 1/2 x 1" CDZ2-41 (Other Tools & DIY)

Anode Zinc Ingot 4 x 1 1/2 x 1" CDZ2-41 - Description: Anode Zinc Ingot 4 x 1 1/2 x 1" To suit Commercial, pleasure craft, buoys, pylons, lobster, cray, crab pots and seachests. Anode Length: 100mm Anode Width: 38mm Anode Depth: 25mm Strap Width: - Strap Thick: - Other Insert Type: - Net Wt: - Gross Wt: 0.70Kg

Anode Divers Dream 45-230c CDZ1-126-500H (Other Tools & DIY)

Anode Divers Dream 45-230c CDZ1-126-500H - Description: Anodes Drivers Dream 45-203c Anode Length: 300 Anode Width: 150 Anode Depth: 13 Net Wt: 3.20 Gross Wt: 3.40Kg Other Insert Type: Steel insert plate 2 slotted holes 45 - 20mm centres

Float 10" Foam Filled Yellow (Other Tools & DIY)

Float 10" Foam Filled Yellow - Description: Float 10" Foam Filled Yellow Manufactured from high density UV stabilised polyethylene for a long life. Foam filling is closed cell polyurethane foam which allows floating even if the outer skin is damaged. Available in yellow (for standard pleasure boat moo********* rcial vessel mooring. Identity: 250mm (10") Height: 3 ...

Anode Aluminium Pot 4 x 1 x 1 CDA-00 (Other Tools & DIY)

Anode Aluminium Pot 4 x 1 x 1 CDA-00 - Description: Anodes Aluminium Pot 4 x 1 x 1 To suit cray, lobster and crab pots. Overall Length: 300mm Anode Length: 100mm Anode Width: 27mm Anode Depth: 27mm Other Insert Type: 3mm Ø Gal Wire Gross Wt: 0.19Kg

Turnbuckle Galvanised Hook & Eye 10mm (Other Tools & DIY)

Turnbuckle Galvanised Hook & Eye 10mm - Description: Turnbuckles Hook & Eye, Forged Hot Dipped Galvanised Size: 10mm

Wire Rope Grip Commercial 1" 25mm (Other Tools & DIY)

Wire Rope Grip Commercial 1" 25mm - Description: Wire Rope Grip Electro Galvansied Size: 25mm NOT TO BE USED FOR LIFTING PURPOSES

Shackle Bow Commercial 10mm 3/8" (Other Tools & DIY)

Shackle Bow Commercial 10mm 3/8" - Description: Shackles Bow Commercial Size: 10mm NOT TO BE USED FOR LIFTING PURPOSES

Paw Rigging Plate Large 45kn (Other Tools & DIY)

Paw Rigging Plate Large 45kn - Description: For easily organizing the work station and creating multi-anchor systems 19 mm holes allow the locking sleeves of most carabiners to pass through Made of aluminum: excellent strength-to-weight ratio Specifications Material(s): aluminum Breaking strength: 45 kN Certification(s): CE, NFPA 1983 General Use

ASCENSION Right Handed Yellow B17ARA (Other Tools & DIY)

ASCENSION Right Handed Yellow B17ARA - Description: Handled rope clamp for rope ascents The ASCENSION handled rope clamp is designed for rope ascents and features an overmolded grip and ergonomic upper part for a comfortable and powerful grip when pulling with one or two hands. The ASCENSION handled rope clamp has a wide lower hole for easily attaching two carabiners for a lan ...

Petzl Podium Working Seat (Other Tools & DIY)

Petzl Podium Working Seat - Description: Petzl Podium Seat All Purpose Suspension Seat The Petzl Podium is the most popularindustrial rope access seat currently available. Designed for prolonged suspension work, it has a wide and rigid seat which is very comfortable and that can easily be adjusted while hanging in your harness. It furthermore provides excellent sta ...

ASAP Fall Arrestor c/w Absorbica Kit (Other Tools & DIY)

ASAP Fall Arrestor c/w Absorbica Kit - Description: Mobile fall-arrest device for rope. To comply with Australian Regulations, the ASAP® is supplied complete with a Petzl Absorbica L57 the ASAP® is not available separately. With its unique locking system, the ASAP is a reference product in fall protection for workers at height. In normal use, the device moves freely along ...

Karabiner Alloy Steel Oval Screw Gate 2 (Other Tools & DIY)

Karabiner Alloy Steel Oval Screw Gate 2 - Description: Steel Oval Screw Gate Karabiner - 23kN.

Wire Rope Grip H/Duty 10mm (Other Tools & DIY)

Wire Rope Grip H/Duty 10mm - Description: Wire Rope Grip Hot Dipped Galvanised Size: 10mm

Turnbuckle Galvanised Eye & Eye 10mm (Other Tools & DIY)

Turnbuckle Galvanised Eye & Eye 10mm - Description: Turnbuckles Eye & Eye, Forged Hot Dipped Galvanised Size: 10mm

Thimble AS Type H/Duty Galvanised 10mm (Other Tools & DIY)

Thimble AS Type H/Duty Galvanised 10mm - Description: Thimble Heavy Duty Commercial Hot Dipped Galvanised Size: 10mm

Thimble Commercial Gal 10mm (Other Tools & DIY)

Thimble Commercial Gal 10mm - Description: Thimble Commercial Galvanised Size: 10mm NOT BE USED FOR LIFTING PURPOSES

Split Link Galvanised 10mm (Other Tools & DIY)

Split Link Galvanised 10mm - Description: Split Link Galvanised Size: 10mm Finish: Hot Dipped Galvanised NOT USED FOR LIFTING PURPOSES

Shackle D Commercial 10mm 3/8" (Other Tools & DIY)

Shackle D Commercial 10mm 3/8" - Description: Shackles Dee Commercial Size: 10mm NOT TO BE USED FOR LIFTING PURPOSES

Eye Nut Shouldered Din 582 10mm (Other Tools & DIY)

Eye Nut Shouldered Din 582 10mm - Description: Galvanised Shouldered Eye Nut DIN582 Size: 10mm W.L.L Tonnes: 0.23

Anode Prop 1 1/2" Zinc Only CDZPN-F (Other Tools & DIY)

Anode Prop 1 1/2" Zinc Only CDZPN-F - Description: Prop Anode 1 1/2" To suit outboards, outdrives and inboards. Propeller Shaft Dia. Inches: 1 1/2" Propeller Nut Thread Size: 1 1/8" UNC Thread Per Inch (T.P.I): 7 Part Number Propeller Zinc Nut & Bronze Insert: CDZPN-FF Part Number Propeller Zinc Anode Only: CDZPN-F